VINFAST series diagnostic software V10.20

Introduction

This diagnostic software can test the ECUs of VINFAST models:

• Модуль управления корпусом
• Electronic Brake Control Module
• Модуль управления двигателем
• HVAC Control Module
• HVAC Controls
• Inflatable Restraint Sensing and Diagnostic Module
• Instrument Cluster
• Parking Assist Control Module
• Усилитель рулевого управления Control Module
• Serial Data Gateway Module - Processor 1
• Serial Data Gateway Module - Processor 2
• Serial Data Gateway Module - Processor 3
• Коробка передач Control Module
• radio and so on.

Basic Function:

• Информация о версии
• Fault Code
• Считывание потока данных
• Активация тестов механизмов

Special Function

The encoding function and setting information after replacing the car computer are all under the work support menu.

Special Functions in Some Systems

• Brake Pedal Position Sensor Learn
• CAN Bus Configuration Learn
• Clutch Pedal Position Learn
• Configure New Module
• Control Module Reset
• Crankshaft Position Variation Learn
• Engine Oil Life Reset
• Erase Valet Mode Code
• Fuel Trim Reset
• HO2S Heater Resistance Learned Values Reset
• HVAC Actuators Learn
• HVAC Afterblow Configuration
• Read LIN Bus Device ID Information
• Reset High Voltage Disable Request After Crash Event Detected
• Reset Manufacturer Enable Counter
• Steering Wheel Angle Sensor Centering
• Steering Wheel Angle Sensor Learn
• Throttle Body Idle Air Flow Compensation Reset
• Коробка передач Service Fast Learn
• Yaw Rate Sensor Learn

Coverage

• Fadil

Обновления

New Functions

• Added basic function,Активация тестов механизмов and special function for 2023 and 2024 Fadil.